Last verified 2026-10-22

Puzzle solutions

Eight puzzles have a community solution I can cite. G-46B does not, so it has no page. Each card gives the area, the one-line answer, and whether more than one guide agrees.

In this section

Laser puzzle solution — Send the beam through Mirror/Piercing, then Serene/Stabilizing, then Fiery/Heating. Do the yellow room before the turquoise room, and finish in the receiver. Use Pingosius Crystalis, not the lookalike Pingosso Crystallo.
Cable, battery and generator puzzle — Start at GEN and keep one continuous cable to Psi 07. Do not jump to a door that just opened. Sigma 03 opens red, Sigma 02 opens green, and Delta 03 opens blue. You still have a single Goop cube until the R&D upgrade.
Greenhouse and plant puzzle — In xenobotany the past player sets a seed and a condition, and the future player sees what grew. One community walkthrough reports these two combinations: blue plus purple plus sunlight, and blue plus red plus water. The eye sensor has to see a player or the device stays dead.
Wire puzzle solution — Work backward from the locked door. Each colored cable runs to a mechanism. Goop cubes sit on pressure plates. The Hook Gun pulls or positions the other targets. Every indicator on that door has to stay active. Until the R&D upgrade you can carry one cube.
G-46C puzzle solution — In the Temporal Research Centre, set the two levers to the blue zone, then press the 3rd and 4th buttons on the top row, the 2nd on the middle row, and the 3rd on the bottom row. Three guides describe those positions as fixed. Re-read the panel anyway, because the symbols beside the buttons can change.
Symbol puzzle and six rings — On the particle accelerator, one player reads symbols and the other presses them on a 4 by 4 grid, then sets three dials from 1 to 5 using the partner's display. For the three six-ring designs described in the walkthrough, the order is 4, then 1, then 5. That ring order is a single source. Check it twice.
Floppy disk and resin puzzle — The resin mixer sequence cited by both walkthroughs is 4, 3, 1, 4: styrene, acrylonitrile, butadiene, styrene. Floppy door 1 uses four 90-degree dials. Door 2 moves in 45-degree steps, including diagonals. The 3D printer is a 4 by 4 toggle grid.
Rune puzzle solution — There are two rune types. Plant runes are the crosses. Effect runes are the triangles. Put the effect you need on the plant you need, and do not stack an increase with a decrease. The eye must see a player or the device looks broken.

Fifteen-button glyph panel in the Temporal Research Centre — Glyph button panel. Official Steam screenshot, Total Mayhem Games.

What I checked

I cross-read Steam guides and two walkthrough sites on 22 October 2026. Where three sources named the same buttons, I printed the buttons. Where only pictures existed, I described the method and left the exact combo out.

Index

Open the room you are standing in. Do not treat a later puzzle's code as a master password.

Puzzle	Where	One-line answer
Laser	Optics, after the stabilizer	Mirror, then serene, then fiery
Power network	R&D	GEN through to Psi 07
Greenhouse	Xenobotany	Past plants, future checks
Wire	After both tools	Trace back from the door
G-46C	Temporal Research	Top 3 and 4, middle 2, bottom 3
Symbols	Particle accelerator	Read the grid, then three dials
Floppy and resin	Miniature lab	Resin 4-3-1-4
Rune	After the greenhouse	Plant rune plus effect rune

A laser beam crossing an optics room — Laser optics. Official Steam screenshot, Total Mayhem Games.

Questions

Why is G-46B missing?

Steam search returned no guide for that label on 22 October 2026. G-46C is the 15-button puzzle that is documented.

Will a code work in every session?

Symbol panels and some dials change. Re-read the display.

Are these official solutions?

No. They are community write-ups. The achievement names are the official part.

Keep going

Walkthrough Sector order Laser Highest-demand puzzle Guide How to talk it through Home Facts

Sources

Whisper walkthrough — Puzzle mechanics
GamerBlurb laser — Crystal order